Data Center Machining and Manufacturing Services

Greno Industries provides data center machining and manufacturing services for new builds and retrofits. We understand that enterprise, hyperscale, and edge data centers need reliable power, cooling, and connectivity – and that behind every one of these systems is a network of machined metal parts that support uptime, thermal management, and power usage effectiveness (PUE).

From power systems to cooling hardware to structural components, Greno manufactures the metal parts that support uptime in an industry where reliability is critical.

Our capabilities include CNC milling, large-diameter turning, gun drilling, welding, kitting, and industrial assembly—allowing customers to source complete solutions from a single manufacturing partner.

It’s all backed by AS9100D:2016 and ISO9000:2015 quality plus over 65 years of service.

Why Data Centers Need Precision Machining

Data centers are associated with servers and software, but their physical infrastructure is built on engineered metal components that must withstand continuous thermal cycling, high electrical loads, vibration and mechanical stresses, and corrosive environments. Tight tolerances for alignment, sealing, and flow control are critical.  

From bus bars to cooling manifolds to structural mounting hardware, metal parts must be machined with precision to ensure uptime in an industry where the gold standard is 99.999%. Greno’s capabilities allow data center operators and integrators to source these parts from a single supplier. We can also procure outsourced parts and kit them together.

Power Distribution and Electrical Infrastructure Components

Data centers depend on stable, high‑capacity electrical distribution. Many of the components in these systems require precision machining, tight tolerances, and alloys that can withstand high heat and electrical loads. Greno provides busbar hardware and mounting components, switchgear and UPS structural components, and generator and backup parts.

Bus Bar Hardware and Mounting Components

Bus bars are usually fabricated from copper or aluminum extrusions, but their mounting brackets, standoffs, clamps, and insulating hardware are often machined from stainless steel or specialty alloys. Greno machines:

  • Precision standoffs and spacers

  • Brackets and mounting plates

  • Threaded hardware and custom fasteners

  • Insulator housings and support blocks

Switchgear and UPS Structural Components

Switchgear frames and the housings for uninterruptible power supplies (UPS) also require precision machined components. Ask Greno for:

  • Hinges, latches, and mechanical linkages

  • Mounting rails and alignment pins

  • Precision‑bored housings for breakers and disconnects

Generator and Backup Power Components

Today, many data centers rely on large diesel or natural gas generators. In the future, aeroderivative turbines and small nuclear reactors are expected to meet growing industry demand. Greno’s experience in power generation solutions translates directly into our ability to provide parts like:

  • Engine brackets and housings

  • Couplings and shaft components

  • Flanges, covers, and machined manifolds

Data Center Cooling System Components

Cooling is the largest operational cost in most data centers, and the hardware behind depends on machined metal parts. As liquid cooling and immersion cooling grow, the demand for precision‑machined components is expected to increase dramatically. Greno is ready to provide you with machined parts for data centers that use either air cooling or liquid cooling.

Liquid Cooling Manifolds and Distribution Blocks

Liquid cooling manifolds and distribution blocks need deep bores, intersecting channels, and precision sealing surfaces. They’re perfect for Greno’s deep hole drilling and CNC machining capabilities. Whether your project is for a new data center build or a retrofit, ask us for:

  • Coolant manifolds

  • Cold plate housings

  • Pump and valve bodies

  • Flow control blocks

  • Heat exchanger end caps

Chiller and HVAC Mechanical Hardware

Air cooled data centers contain large chillers and HVAC systems that need metal parts that Greno can machine for you. Examples include:

  • Compressor housings

  • Mounting brackets

  • Shaft components

  • Bearing housings

  • Structural frames

Immersion Cooling System Components

Data centers that use immersion cooling contain cooling tanks and circulation systems that require a variety of precision machined parts. Ask Greno for:

  • Precision flanges

  • Threaded inserts

  • Structural supports

  • Sealing surfaces machined to tight tolerances

Our experience with machining stainless steel and specialty alloys means that we’re ready to supply you with parts that can withstand dielectric fluids and corrosive environments.

Server Rack, Cabinet, and Structural Hardware

Even the most advanced servers depend on a data center’s mechanical infrastructure. For racks, cabinets, and structural hardware, Greno can machine:

  • Rack mounting rails

  • Structural brackets

  • Alignment pins

  • Hinges and latches

  • Cable management hardware

  • Chassis components for server enclosures

These parts must be dimensionally consistent across large production runs, and that’s an area where Greno’s CNC milling and turning capabilities excel.

Fiber, Networking, and Connectivity Hardware

Data centers contain high‑density fiber and copper networking systems that require precision alignment and stable mounting. Greno provides:

  • Fiber tray brackets

  • Optical module housings

  • Cable routing hardware

  • Precision alignment blocks

  • Connector housings and protective covers


These components often require tight tolerances, smooth finishes, and materials that resist corrosion. In other words, they’re ideal for Greno’s machining environment.

Facility Infrastructure and Mechanical Systems

Beyond the IT hardware, data centers rely on a wide range of machined components for building‑level systems. Greno can machine parts for fire suppression systems, raised floor and structural support hardware, and mechanical room components. The following sections describe some of what we can provide.

Fire Suppression Systems

  • Valve bodies

  • Nozzle components

  • Mounting hardware

  • Pressure‑rated fittings

Raised Floor and Structural Support Hardware

  • Pedestal bases

  • Support brackets

  • Leveling hardware

  • Load‑bearing plates

Mechanical Room Components

  • Pump housings

  • Flanges

  • Shaft components

  • Bearing blocks

How Greno’s Capabilities Support Data Center Machining and Manufacturing

Greno’s machining capabilities align with the needs of data center integrators and operators. From CNC milling to large diameter turning to gun drilling and more, we offer the right combination of services.

CNC Milling for Complex Geometries

Data center components like cooling manifolds, brackets, and housings require multi-face machining, tight tolerances, and precision sealing surfaces. Greno provides CNC milling services and offers complex pocketing and contouring, precision flatness and parallelism, high-accuracy hole patterns, and the machining of stainless steels and specialty metals.    

Large‑Diameter Turning for Power and Cooling Systems

Backup power systems, pump assemblies, and cooling hardware often require large, round, or cylindrical components. Greno’s large diameter turning supports

  • Shafts

  • Housings

  • Flanges

  • Couplings

  • Rings and collars

Gun Drilling for Deep, Straight, High‑Accuracy Bores

Liquid cooling systems need deep‑bored manifolds and flow channels. Greno’s gun drilling capabilities support:

  • Deep, straight bores up to 60 inches

  • Precision alignment for multi‑port manifolds

  • High‑pressure coolant drilling

  • Machining of tough alloys like stainless steel and Inconel

Fabrication, Welding, and Assembly for Added Value

Many data center components require more than machining. That’s why Greno also provides:

Partner With Greno for Data Center Machining and Manufacturing

As data centers evolve to support artificial intelligence (AI) workloads, higher rack densities, and more advanced cooling technologies, the demand for precision‑machined components will continue to grow. Greno Industries is ready to provide the machining, drilling, turning, fabrication, and assembly services that you need for this IT infrastructure.

Contact Greno Industries for data center machining and manufacturing services, or to learn more about our capabilities.

Industries Served
Industries Served